Spinera Resort Electric Pump 230V Platinum — Overview
The Spinera Resort Electric Pump 230V Platinum is a professional dual-motor electric pump built for high-volume inflatable products — yacht slides, aquaparks, professional water-play structures and beach-club equipment. Primary motor: 1000 W / 1800 l/min / 230 mbar (3.3 psi). Booster motor: 2000 W / 2500 l/min / 350 mbar (7.3 psi). Run them sequentially or simultaneously for maximum throughput and pressure.
A single pump for everything from rapid initial fill to high-pressure final top-up. Designed for the Spinera Professional Aquapark range and other resort-grade inflatables.
Two-Stage Pump Concept
The primary motor handles the fast initial fill (high volume, low pressure). The booster motor adds high pressure for final inflation. Together they deliver maximum throughput in the shortest possible setup time.
One-Button Operation
Orange button for primary motor; red button for booster. Use one, both or alternate — fully under operator control.
Thermal-Fuse Protected
Both motors are protected by thermal fuses. Recommended: check the pump regularly during hot-weather deployments to prevent overheating.
Resort / Professional-Grade Build
High-quality materials and pro-grade construction — designed for continuous heavy use at beach clubs, yacht charters and aquaparks.
Pump Details & Technical Specifications
Key Resort Electric Pump specs at a glance.
| Voltage | 230 V (120 V available) |
|---|---|
| Primary Motor | 1000 W · 1800 l/min · 230 mbar (3.3 psi) |
| Booster Motor | 2000 W · 2500 l/min · 350 mbar (7.3 psi) |
| Modes | Primary only · booster only · both motors simultaneously |
| Function | Inflate & deflate |
| Cable Length | 3 m |
| Dimensions | 32 × 17 × 26 cm |
| Weight | 4.1 kg |
| Safety | Thermal-fuse protection on both motors |
| Use Case | Resort, yacht, charter, aquapark — high-volume professional inflatables |
What the Two Motors Are For
Understanding the pump’s two-motor concept makes setup faster and the pump last longer:
| Stage | Motor | What it does |
|---|---|---|
| Initial fill | Primary (orange) | High volume, low pressure — fills the bulk of the inflatable fast |
| High-pressure top-up | Booster (red) | Lower volume, high pressure — reaches operating pressure for stiff structure |
| Maximum throughput | Both | Combined 4500 l/min while both deliver pressure — fastest possible inflation |
| Deflate | Primary | Reverse the airflow to evacuate the inflatable for pack-down |
Who is the Professional Dual-Motor Pump for?
The Resort Electric Pump is built for operators of professional inflatables:
- Yacht and superyacht owners who deploy aquapark modules from the swim platform and want fast setup
- Charter and resort operators who set up and tear down inflatables on a guest schedule
- Aquapark operators who service multiple Spinera modules per session and benefit from the dual-motor speed
- Beach-club owners who run heavy-duty inflatables in daily rotation
- Event organisers who set up large inflatable structures and need professional-grade throughput
For small consumer inflatables (single SUPs, kayaks, beach toys) a smaller battery or 12 V pump is usually sufficient.
FAQ — Power, Pressure & Use
Why does the pump have two motors?
The primary motor handles fast initial fill (high volume, low pressure). The booster motor adds high pressure for final inflation. Running both delivers maximum throughput.
How do I operate the pump?
Press the orange button for the primary motor and the red button for the booster. Use either independently or both simultaneously.
What’s the maximum pressure?
The booster motor reaches 350 mbar (7.3 psi). The primary alone reaches 230 mbar (3.3 psi). Combined operation delivers the booster’s pressure with the combined air flow of both motors.
How fast does the pump inflate?
Maximum combined throughput is 4300 l/min (1800 + 2500). Real-world fill time depends on the inflatable’s volume and target pressure.
Can the pump also deflate?
Yes — reverse the airflow with the primary motor to evacuate the inflatable for pack-down.
Is the pump protected against overheating?
Yes — both motors have thermal fuses. Spinera recommends checking the pump regularly in hot weather to avoid thermal cutout during long sessions.
Which inflatables is this pump designed for?
Spinera Professional Aquapark modules (including the Pirates Rock), yacht slides, large floating platforms and other resort-grade inflatables.
What is the cable length?
3 metres — reach a 230 V outlet on a yacht swim platform or beach-club power point.
How heavy is the pump?
Only 4.1 kg — light enough for single-person handling across a beach club or yacht.
What voltage options exist?
230 V (EU standard) and 120 V (US / parts of South America). Specify when ordering.
Can I use the pump with a generator?
Yes — with a generator sized for the combined 3 kW peak load when running both motors. A 4 kW+ generator is recommended for safe simultaneous operation.
How do I store the pump?
Dry, in a cool place. Wipe down after salt-spray exposure and let everything dry before storage to prevent corrosion.
Reviews
There are no reviews yet.