Aerofoils Spare Screws Set Wing — Overview
Set of 3 original M6 × 30 mm stainless steel screws used to mount the Aerofoils eFoil front wing and tail stabilizer to the mast plate. Wings are designed to be swapped in minutes, so keep a fresh set of screws in your service kit — ideal whenever you build a new wing setup or schedule routine corrosion-prevention service.
Original Aerofoils Hardware
These are the original M6 × 30 mm screws supplied by Aerofoils for the wing-to-mast-plate mount. Matching the original spec ensures correct thread depth and proper seat in the mast plate.
Stainless Steel for Saltwater
Stainless steel resists saltwater corrosion well, but routine replacement after wing changes or visible signs of wear keeps the mounting reliable for many seasons.
Service-Kit Standard
Keep a fresh set in your eFoil service kit so you always have replacement hardware on hand for wing changes or wing setup swaps.
Spare Screws Wing Details & Technical Specifications
| Quantity | 3 pieces |
|---|---|
| Specification | M6 × 30 mm |
| Material | Stainless steel (saltwater-grade) |
| Use Case | Wing-to-mast-plate mount — wing exchange, corrosion-prevention service |
| Compatibility | All Aerofoils eFoil Wing Sets and Front Wings |
Wing Screws vs. Board Screws
Aerofoils uses two different screw sets in the eFoil platform — do not mix them.
| Wing Screws (this product) | Board Screws | |
|---|---|---|
| Quantity | 3 pieces | 6 pieces |
| Specification | M6 × 30 mm | M6 × 20 mm |
| Mount | Front wing / stabilizer to mast plate | Drive unit to board |
| Material | Stainless steel | Stainless steel |
Who is the Spare Screws Set Wing for?
The Wing Screws Set serves a clearly defined audience:
- Aerofoils Audi e-tron eFoil owners who change wing setups regularly (e.g. switching between Freeride and Freecarve) and want fresh screws for each setup
- eFoil schools, charter operators and rental fleets servicing multiple wing setups across guest sessions — the universal M6 × 30 mm screws keep the service kit simple
- Riders who use the eFoil in salt water frequently and proactively replace mounting screws before corrosion causes thread issues
- Owners who lost individual screws during a wing change or transport and need a full replacement set
FAQ — Fit, Replacement & Care
Who is the Aerofoils Spare Screws Set Wing for?
Aerofoils Audi e-tron eFoil owners who change wing setups regularly, schools / rental fleets servicing multiple wings, frequent salt-water riders proactively preventing corrosion, and owners replacing lost or worn individual screws.
How often should I replace wing screws?
Replace after visible corrosion or every time you build a new wing setup. Stainless steel resists saltwater well, but fresh screws are inexpensive insurance against a stripped thread at the wrong moment.
Do I also need board screws?
Board screws are different (M6 × 20 mm) — see Aerofoils Spare Screws Set Board (6× M6×20).
Are these the same screws Aerofoils ships with the wings?
Yes — these are original Aerofoils-spec M6 × 30 mm screws, identical to those included with the Aerofoils eFoil Wing Sets.
Why stainless steel?
Stainless steel resists saltwater corrosion much better than carbon steel — the right choice for any marine hardware that comes into repeated contact with salt water.
How many screws come in the set?
Three pieces — the full wing-mount set for one Aerofoils front wing or stabilizer.
Can I use these screws on all Aerofoils wings?
Yes — the wing-to-mast-plate mount uses the same M6 × 30 mm hardware across the entire Aerofoils wing range (Easyride, Freeride, Freecarve, Freerace).
What tool do I need to install them?
Standard hex / Allen key matching the screw head — the same tool you use to remove the existing mounting hardware.
Should I apply any thread lubricant?
A small amount of marine-grade anti-seize compound on the threads is good practice for salt-water hardware and helps with future removal.
How do I store spare screws between uses?
Keep them dry in their original packaging or in a small parts box in your eFoil service kit. Stainless steel is corrosion-resistant but stays in best condition when stored dry.
Reviews
There are no reviews yet.